Working Hours: Weekdays 08:30 - 18:00
Saturday 08:30 - 14:00
GO-205-II
More functions, shorter cycle time, more affordable, high precision, high rigidity.
|
MODEL
|
GO-205-II
|
||
| Machining capacity | |||
| Bar stock diameter | 3~20 mm | ||
| Max. work chucking diameter at back spindle side | 20 mm | ||
| Max. machining length |
170 mm ( Direct motor - driven guide bushing ) 80 mm ( Mechanical-drive guide bushing ) 250 mm ( Fixed guide bushing ) 45 mm ( Guide bushing-less ) |
||
| Max. main spindle drilling / tapping diameter | ø10 mm / M10 | ||
| Max. back spindle drilling / tapping diameter | ø8 mm / M8 | ||
| Max. drilling / tapping dia. of cross tool spindle | ø6 mm / M5 | ||
| Max. mountable slitting saw dia. / Nos. at cross tool post | ø30 mm × 2 | ||
| Max. drilling / tapping diameter of back tool spindle | ø6 mm / M5 | ||
| Machine capacity | |||
| Speed | Main spindle | 200～10,000 min-1 (※1) | |
| Back spindle | 200～12,000 min-1 (※2) | ||
| Cross tool spindle | 200～5,000 min-1 | ||
| Back tool spindle | 5,000 min-1 | ||
| Tool numbers : 21 | OD turn tool (left) | 2 | |
| OD turn tool (right) | 3 | ||
| Face fixed ID tool | 4 | ||
| Back fixed ID tool | 4 ( mounted at face / back ID tool post) + 2 ( mounted at independent back tool post) | ||
| Cross live tool | 4 | ||
| Back live tool | 2 | ||
| Tool size | |||
| OD turn tool shank | 12 × 12 × 85 mm | ||
| Boring tool shank ( for face / back, back tool post ) | ø20 mm | ||
| Chuck for cross live tools | ER16× 4 | ||
| Chuck for back live tools | ER11× 2 | ||
| Rapid traverse | 32 m / min (X: 24 m / min) | ||
| Controlled axes | 5 (X1、Y1、Z1、X2、Z2) | ||
| Main spindle motor | 2.2 / 3.7 KW ( Rated / 15min.) | ||
| Back spindle motor | 1.5 / 2.2 KW ( Rated / 5min.) | ||
| X1、Y1、Z1、X2、Z2 Axis motor | 0.5 KW | ||
| Cross tool spindle motor | 0.5 KW | ||
| Back tool spindle motor | 0.5KW | ||
| Coolant pump motor | 0.75 KW | ||
| Lubrication pump motor | 11W( 0.011KW) | ||
| Spindle cooling oil pump motor | 0.19 KW | ||
| Others | |||
| Net weight | 1,700 Kg | ||
| Equipment capacity | 11 KVA | ||
| Power source required | ≧9 KVA | ||
| Air pressure | ≧0.4 MPa (Kg / cm2 ) | ||
| Air flow | ≧30 NL / min | ||
| Cutting coolant tank capacity | 115L | ||
| Machine size : L×W×H | 1,640 × 1,080 × 1,700 mm | ||
| Standard NC specification |
|
MODEL
|
GO-205-II
|
| No. of controlled axes | 5 (X1,Z1,Y1,X2,Z2) |
| Spindles synchronized (speed ＆ phase angle) | S1- S2 ( Main spindle -Back spindle) |
| Axes synchronized | Z1-Z2 |
| Axes composite control | Z1-Z2 |
| Axes simultaneously controlled | Max. 4 axes / each path |
| Least input increment | 0.001mm ( Diametrical designation for X axes) |
| Max. programmable dimension | ± 8 digits |
| Rapid traverse rate | 32米 / 分m / min (X1: 24 m / min) |
| Spindle / Feed rate override | 0～150% / 10% increments |
| Absolute / incremental command | X,Z,Y: Absolute / U,W,V: Incremental |
| Tool offset pairs | ±6 digits / 64 pairs |
| Display unit | 10.4”color LCD |
 Other NC function |
|
MODEL
|
GO-205-II
|
| C axis at main spindle side |
standard
|
| C axis at back spindle side |
OP
|
| Cross tool spindle rigid tapping |
standard
|
| Threading、synchronous cutting |
standard
|
| Continuous thread cutting |
standard
|
| Manual handle feed |
standard
|
| Memory card I/O interface |
standard
|
| RS232C interface |
standard
|
| Background editing |
standard
|
| Run time and parts count display |
standard
|
| Custom macro |
standard
|
| Constant surface speed control |
standard
|
| Spindle synchronous control |
standard
|
| Axis synchronous control |
standard
|
| Tool geometry / wear offset |
standard
|
| Programmable data input |
standard
|
| R Chamfering / corner R |
standard
|
| Tool nose radius compensation |
standard
|
| HRV control |
standard
|
| Multiple repetitive cycle |
standard
|
| Extended part program editing |
standard
|
| Inch / metric conversion |
standard
|
| Direct drawing dimension programming |
standard
|
| Canned cycles for drilling |
standard
|
| Rigid tapping (Main / back spindle) |
standard
|
| Manual handle retrace |
OP
|
|
MODEL
|
GO-205-II
|
| C axis at main spindle side |
standard
|
| C axis at back spindle side |
OP
|
| Cross tool spindle rigid tapping |
standard
|
| Threading、synchronous cutting |
standard
|
| Continuous thread cutting |
standard
|
| Manual handle feed |
standard
|
| Memory card I/O interface |
standard
|
| RS232C interface |
standard
|
| Background editing |
standard
|
| Run time and parts count display |
standard
|
| Custom macro |
standard
|
| Constant surface speed control |
standard
|
| Spindle synchronous control |
standard
|
| Axis synchronous control |
standard
|
| Tool geometry / wear offset |
standard
|
| Programmable data input |
standard
|
| R Chamfering / corner R |
standard
|
| Tool nose radius compensation |
standard
|
| HRV control |
standard
|
| Multiple repetitive cycle |
standard
|
| Extended part program editing |
standard
|
| Inch / metric conversion |
standard
|
| Direct drawing dimension programming |
standard
|
| Canned cycles for drilling |
standard
|
| Rigid tapping (Main / back spindle) |
standard
|
| Manual handle retrace |
OP
|
| Item |
| Mechanical-drive rotary guide bushing |
| Motor direct- drive rotary guide bushing |
| Oil cooler (for coolant temperature control) |
| Oil mist separator |
| High pressure coolant system |
| Work conveyor |
| Rear work discharge (from back spindle) |
| Chip conveyor and chips cart |
| Main spindle collet sleeve for non-rounded bar (for mechanical-drive guide bushing) |
| Main spindle collet sleeve for non-rounded bar (for guide bushing-less type) |
| Main spindle collet sleeve for non-rounded bar |
| Tool setting block gauge |
| Small- bore spindle sleeve for reducing bar vibration (ø6～17, 1 mm increment) |
| ER11 drill collet holder (ø20- shank , for face / back , or back ID tool post ) |
| ER16 drill collet holder (ø20- shank , for face / back or back ID tool post ) |
| Double-headed ER11 drill collet holder (ø20- shank , for face / back ID tool post ) |
| Double-headed ER11 / ER16 drill collet holder (ø20- shank , for face / back ID tool post ) |
| Bar feeder |
| Tooling zone work light |
We provide our customers with expert staff and experience in CNC machine tools. Contact Us